Surfacing
Resin driveway installation with the base, drainage, edges and intended vehicle use considered alongside the finished appearance.
We offer resin driveway installation for customers looking for an aggregate finish to a domestic entrance or parking area. The starting point is the whole driveway: what supports it, how water leaves it and how it meets the house. We agree the proposed resin system and preparation in the specification before work starts.
Resin-bound and resin-bonded are different constructions. Bound systems mix aggregate with resin before placement; bonded systems attach aggregate to a resin coating. The finish, drainage behaviour and base requirements differ. A quotation should identify the actual system instead of using the word resin as if every product performed alike.
Cracking, loose areas and settlement need investigating before an overlay is considered. A decorative finish cannot provide support that is missing below it. We assess whether the existing base can be retained and identify preparation separately from the finishing work.
We establish finished levels at doors, garages and paths. Drain covers need to remain accessible, and edge details need to retain the surface. These details affect both the layout and the amount of preparation.
A claim that a driveway is permeable must refer to the full construction and a suitable destination for water. A porous finish over an unsuitable base does not settle the drainage design. We also discuss parked vehicles, steering movements, gradients and the practical demands on the entrance.
Reopening times and maintenance depend on the specified product and conditions. We include those matters in the job discussion rather than attaching one guarantee or one curing time to every resin driveway.
Our work
Every photograph here is Laymac's own, taken on the job.
What people say
Had my driveway done by laymac ltd done a wonderful job got the job completed on time always kept the site clean and tidy staff well Mannered and friendly
Fantastic professional company stuck to their word and got the job done efficiently and quick thanks very much for your service
Had Lay Mac over to do resin on a rental property off mine , I was very happy with the finishing project looked great .
Everything else we do
Tar and chip surface dressing for sound private roads, long drives and access routes that need a renewed wearing surface.
Learn more →
Private roads, estate roads and access routes surfaced, resurfaced and repaired.
Learn more →
Tarmac and asphalt laid for driveways, private roads, parking areas and working yards, with preparation matched to the traffic.
Learn more →
Tarmac, tar and chip, block paved and gravel driveways, laid on a base built to last.
Learn more →
Yards, car parks, loading areas and industrial hardstanding built for real weight.
Learn more →
Excavation, drainage and sub-base preparation, the work under the surface that decides how long it lasts.
Learn more →
Stone farm tracks and estate drives, built to carry weight and to look right in the landscape.
Learn more →
Reclaimed road planings laid and compacted for suitable tracks and hardstanding, with the material and ground assessed before use.
Learn more →
Surfacing for farms, estates, equestrian yards and rural businesses, planned around a working site.
Learn more →
Block paving laid for driveways, entrances and parking areas, with the layout and supporting construction designed around daily use.
Learn more →
Recycled materials laid for suitable access routes and hardstanding, selected for their role in the finished construction.
Learn more →
Garden, boundary and retaining walls, entrance piers, brick steps and extension brickwork, built on a proper footing.
Learn more →
Luxury patios, outdoor kitchens and cooking areas, with the walls, steps and drainage built properly underneath.
Learn more →Where we work
These are the areas we cover. If yours is not listed and you are nearby, ring anyway, it is a short conversation.
Common questions
MyJobQuote's 2026 resin driveway guide says a resin driveway can be walked on after about four to six hours and driven on after roughly 24 hours, though cold or damp weather stretches that. The whole job takes two to five days, depending on size and how much groundwork is needed. The resin itself goes down in a day.
Read the full answer →Before you ring
No. Resin systems differ, and the supporting construction and drainage also matter. The proposed specification must explain how water is managed.
Possibly, if its construction, stability and levels are suitable for the chosen system. Loose areas, movement and drainage defects need assessing first.
Compare the named system, preparation, area, edges, drainage and aftercare. Two quotes that both say resin can describe materially different jobs.
West Sussex · Surrey · East Sussex · Hampshire
Give us a ring. If nobody picks up we are on a job, so leave a message and you will get a call back.
